性少妇freesexvideos强迫,网红一级片,国产美女高潮在线观看

ECOPAN hot water radiant panels make heating in large-space buildings more energy efficient

time：2024-11-06
hits：717次
source：正弘奧能

Currently, industrial buildings in China are mostly equipped with convection heating systems. The heating equipment heats the air in the surrounding environment, and then uses the density characteristics of hot and cold air to exchange heat, thus achieving the goal of raising the overall temperature of the environment. However, the heating effect of this method is affected by the spatial form of the building structure, its insulation performance, and other parameters, and the heating load is relatively unstable. Especially in industrial buildings for high-tech industries, the requirements for heating conditions are higher, and the airflow caused by heating should not be too fast. During the convection heating process, cold and hot air continue to circulate, which will affect people's comfort. Compared with this, radiation heating will not cause air flow to a great extent, and the heat lost is relatively small. The building envelope can only absorb heat from the indoor air and dissipate it through its surface to the outside. 
 
Hot water radiation panels are a type of metal radiation panels that can be used for full-building heating and localized heating in specific areas or work zones in buildings ranging in height from 3m to 30m. They are not only highly energy-efficient but also environmentally friendly, space-saving, and highly comfortable. They have a wide range of applications, including large shipyards, ships, aircraft, and automobiles repair halls, building materials markets, shopping malls, exhibition halls, multi-functional gymnasiums, and entertainment halls, among many others. 
 

	In the process of hot water radiation panel radiant heating, the radiant heat is directly irradiated to the heating object, and very little heat needs to be heated in the gas in the environment, so the air temperature in the same conditions is very low, usually 2-3°C, so the indoor and outdoor temperature difference is smaller, so the building's heat loss is relatively lower. The heat consumption of radiation heating is lower than that of convection heating, about 0.8 times that of convection heating, i.e. the heat consumption of radiation heating is about 30% of that of convection heating. Radiant heating is more energy-saving than convection heating by 30-50%. 


	 



	<img src="http://www.daanda.com.cn/Uploads/image/20241106/20241106113813_45412.jpg" alt="" /> 


 
ECOPAN hot water radiation panels promoted and sold by Beijing Leadway Power&nbsp;Co., Ltd. adopt an innovative design concept, and the main feature of ECOPAN is that the radiation panel is made of metal plate, and a steel pipe with a diameter of 1/2" or 3/4" is wrapped around the surface of the metal plate for 2/3 of its length. The pipe, which is the warmest part of the panel, is completely downward, and is wrapped by a metal plate for 70% of its surface (the wrapping angle exceeds 280°), increasing the heat transfer area and ensuring that heat is transmitted from the pipe to the panel effectively, reducing convective flow and increasing radiation. 
 
ECOPAN hot water radiation panel, based on the principle of natural solar radiation, is the most effective heating system with high heat transfer efficiency, small temperature gradient, even heat distribution, and energy savings of 30%-50% compared to conventional floor heating and convection heating methods. Additionally, due to the low thermal inertia of the ceiling radiation panel, the heating system can operate intermittently only when necessary, and there is no other heating system that can provide the same level of comfort at such a low management cost.

av黄色_亚洲更新最快无码视频_亚洲在线www_成人av网址在线_自慰无码一区二区三区_国产乱码精品一区二区

ECOPAN hot water radiant panels make heating in large-space buildings more energy efficient